10 Best Coil Spring Compressor of August 2025

• EASY TO USE: Use the ABN 11.5” Inch Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life
• LOCKS INTO PLACE: Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools
• WIDE RANGE OF COMPATIBILITY: Universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut; Hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool; 11.5-inch threaded rods for 10-inch to 10.5-inch maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)
• BUILT TO LAST: Constructed with forged hooks and center screw hardened for maximum strength and longevity; Designed to withstand extreme pressure in any environment; For professional use
• EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization

ABN

• Heavy Duty 11-4/5” Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life.
• Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
• Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs).
• Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice.
• Orion Motor Tech pursue outstanding quality and 2-YEAR WARRANTY service, only have point of departure, there is no terminal point. If you are not satisfied with this product or if you have any question, please feel free to contact us. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result. 1.Go to your amazon account and find the order. 2.Click the seller name and enter the store page. 3.Click "Ask a question".

Orion Motor Tech

• Aid in the Installation of Coil Spring
• Comes in Sturdy Blow-mold Storage Case
• Slide Hammer is required for use with OEM #27032 Axle Puller, OEM #27049 Pilot Bearing Puller
• Slide Hammer is required for use with OEM #27129 Rear Axle Bearing Puller, OEM #27184 2/3 Jaw Puller

OEM TOOLS

• EASILY INSTALL COIL SPRINGS: Use the ABN | Coil Compressor Tool to help you install coil springs and coil spring spacers; This car spring compressor tool compresses conventional coil springs for replacement or removal from suspension
• FITS YOUR RIDE: Safely compress “loose” coil springs (no shock in the middle of the spring) and the main coils between the upper/lower control arms on most vehicles and light trucks with an arm coil spring front suspension (If it has coil springs, this coil spring tool will work); Not intended for McPherson strut springs or shocks; We do not recommend using on coil springs with special coatings, as it may damage the coating and cause the spring to fail
• EASY TO USE: Instructions not included; Insert this coil springs compressor through the center of the coil spring, engage the hooks with screw shaft centered so both hooks grip a coil towards top of spring, insert fork through lowest coil possible and make sure fork straddles the screw shaft and sits evenly on coil, ensure that the compressor washers are sitting in recessed area of fork, compress spring by slowly tightening screw shaft clockwise while ensuring hooks do not rotate on springs
• BUILT TO LAST: Constructed from heavy-duty metal with a black-oxide finish for maximum strength and longevity that resists rust and corrosion; Between uses, we recommend cleaning and applying anti-seize compound lubrication to the screw shaft threads of this automotive spring compressor to prolong the life of the center screw; Not intended for use with impacts tools (damage to threads may occur)
• EASY STORAGE: Heavy-duty 13” x 2.5” x 7.8” inch (33cm x 6.4cm x 19.8cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization

ABN

• SAFE STRUT SPRING COMPRESSOR TOOL: Rugged Safety latches make broad contact with the Strut Spring, and keep the tool safely locked to the spring during removal & re-installation on the new MacPherson Strut
• HEAVY DUTY DESIGN: Heavy steel body, forged hooks, and hardened center screw hold up against the immense energy of compressed strut springs; these are great tools for mechanics, because they hold up through repeated MacPherson Strut replacements
• FITS MOST MACPHERSON STRUT SPRINGS: 9. 75 inch max opening makes these tools compatible with most MacPherson Strut Springs on both large and small vehicles
• IMPORTANT AUTO SUSPENSION TOOL: MacPherson Struts are the most important element of the suspension system in many modern vehicles, and should be replaced, on average, every 50, 000 to 80, 000 miles
• DON’T CUT CORNERS: Strut replacement can be a time intensive job. You can put yourself in danger of injury if you use inferior tools; the OEMTOOLS MacPherson Strut Spring Compressor won’t slip, and won’t break – This car safety tool does its job right every time

OEM TOOLS

• Wide compatibility: The strut spring compressor is used for the repair and replacement of shock absorbance, struts and springs. Using it to remove and install automotive coil springs up to 5-5/8”O.D, designed to grasp a maximum 3/4” wire diameter spring.
• Unique design: Internal compressor adopts inner coil spring for easy disassemble, it is more efficient than traditional two pieces spring compressors. Thickened thread design to ensure durable and strength.
• Durable steel hooks: This spring compressor tool has a special claw-like claw that is wound around the coil to ensure firm grip and improve safety. The coil compressor hook holds the spring tightly by rotating the easy-to-use hex nut.
• Easy to use: 1/2" drive compression disc spring to replace shock absorber unit or spring. It is suitable for any 7/8" hand socket wrench or high torque impact wrench, you can easy to twist the spring compressor.
• Strength and durability: Forged structures allow for repair of bent struts, strut tubes and damaged parts. Please use anti-sticking agent to lubricate the thread and prolong the service life.

SURGEDO

• This item is designed to compress many MacPherson Strut Spring sizes
• The broad spring contact and built in detent pins help to lock the spring into place for safer
• This Tools Strut Spring Compressor quickly and safely compresses the spring for easy
• replacement of the strut cartridge or strut assembly repair.
• The hooks are forged and the center screw is hardened for long life.

8MILELAKE

• STURDY LOCKING: Our compressor tools feature built-in detent latches to help lock coil in place. The accompanying safety gauge helps you to test if this tool is right for your coil
• EASY REMOVAL AND INSTALLATION: This spring compressor quickly and easily compresses most MacPherson strut springs and coil springs. See the product manual for full instructions and listings
• DURABLE MATERIALS: This coil tool features forged construction for strength and durability. The top-quality steel will enable long usage and keeping your coil in place
• PROTECTION: If something happens to your strut coil spring compressor during normal, everyday use, then don’t stress. This product is covered by the OEMTOOLS Limited Lifetime
• CONVENIENT STORAGE: This coil spring compressor tool comes with a vibrant red carrying case. With sliding locks on the case, your compressor isn’t going anywhere. However, you can take it anywhere with the travel handle and lightweight design

OEM TOOLS

• Permits quick and safe removal or installation of springs while repairing struts; Minimum tensile strength of bolts and 105,000 PSI
• Bolts are made with a hardened and tempered, precision-machined steel with a black oxide finish that prevents corrosion and rust.
• Compressor jaws are made with drop forged, heat treated steel with chrome plating for high strength and durability
• Compressors are designed to maintain and preserve spring curvature while compressing
• Compressors fit most strut sizes on domestic and import vehicles and can be used on other types of strut springs

Hiltex

• STRONG AND DURABLE: Shankly’s coil spring compressor has a drop forged enamel body and is composed of top quality materials, giving the mechanic confidence spring compressor jobs will be done right.
• MAKES SPRING COMPRESSION SAFER: Compressing struts and springs can be dangerous. Shankly’s strut spring compressor features double ended jaws with attachable security hooks for added safety and control.
• VERSATILE TOOL: Shankly’s strut compressor works as a spring compressor for struts and other coil springs on most passenger and light commercial vehicles, providing the mechanic a versatile compressor solution.
• EASY TO USE: Shankly’s spring strut compressor is simple to operate, allowing the mechanic to get the job done right and then move on.
• DIMENSIONS: This coil spring compressor tool has an operating capacity of 300 mm and overall length of 300 mm. 10 inch bolt provides max height of removable spring at 9 ½ inches.

Shankly