10 Best Cable Splitter For Internet And Tv of December 2025

• Multi purpose – this digital Coax Splitter is designed for use with HD TV signals, satellite TV, and high speed INTERNET modems as well as cable TV, amplified Antennas, amplifiers, and other coaxial devices.
• Frequency range – distributes a digital signal of 2. 5 GHz (5-2500 MHz) frequency range
• 2 outputs – splits a single digital signal to up to 2 devices, balanced, and with power pass through on all ports.
• Gold Plated connectors – allows for optimal connectivity, corrosion resistance, and compatible with RG59 and RG6 coax cable.
• Satisfaction – Backed by a limited lifetime and free us-based technical support is available should you have any questions or issues about your purchase.

GE

• Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
• MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
• All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
• 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
• Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.

Reliable Cable Products

• Exceeds the performance standards set by major cable providers
• Compatible with existing and future networks such as MoCA, VoIP and DOCSIS 3.0
• 6kV Surge Protection on all ports
• Coax networking adapters and splitters are not compatible with satellite television systems

Legrand - OnQ

• This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality.
• Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz.
• Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems.
• Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal.
• Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators.

Reliable Cable Products

• Perfectly works with: Comcast, Xfinity, RCN, Optimum, Wow, COX, Spectrum and many more cable providers. Not recommended for Verizon, Direct TV and Century Link.
• -45 dBmV Spurious and Harmonics after 5 Surges of 6 kV Ring Wave with a +55 dBmV Return Signal
• 6 kV Ring Wave Surge Protected. Eclipse Contact Technology (ECT) F-Port. Digital Broadcast, HDTV and MoCa Ready
• Flat 1002 MHz Bandwidth with Minimal Insertion Loss. 35 dB Return Path Output Return Loss and 40 dB Port-to-Port Return Band Isolation.
• Capacitively Coupled F-Ports. SCTE Compliant F-Ports with 1 inch Port Spacing. 100% Soldered Back

Antronix

• 5-2300 MHz (2.3GHz) RF bi-directional digital coax/coaxial cable splitter for CATV, satellite and MoCA configurations
• Internal circuit board for better reliability/durability
• Low signal loss of 3.5db on each output port improving performance and speeds
• All ports are power passing for easy connection to satellites, amplifiers, and cameras
• High shielding structure lowers digital noise and improves signal quality

BAMF Manufacturing

• This is a TV signal amplifier which provides one input and four outputs, and a Cable Modem Bypass Port, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to the cable system without losing signal quality. Unity Gain on all output ports means every device gets the exact same signal level as provided at the input.
• Suitable for Cable TV use only. Not compatible with antenna systems. Compatible With All Standard And Digital Cable TV Services. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems.
• Supports the MoCA specification, so any MoCA device can talk to any other MoCA device connected to the amplifier. MoCA band is 1125-1525MHz.
• Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal.
• Prevents image pixelation with digital cable. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators. Connection cables NOT included.

Reliable Cable Products

• ⏪5-2500MHz (2.5GHz) Coax Splitter:Tolmnnts digital coaxial cable splitter is designed for CATV, Satellite TV,Antenna System, Internet and MoCA Configurations.
• 🔼Premium Quality Coaxial Splitter: Zinc die-cast housing with nickel plating and F-type connector, which are weather resistance, rust-proof and more stable.Get your premium quality, long life span.
• 🔼Low Signal Loss:Internal circuit board,high shielding structure for better performance. Which can lowers digital noise and improves signal quality, reducing packet loss for Modems, and for all other Devices.
• 🔽Easy to Use:All coaxial ports are power passing, which can make your satellite connection much easier.
• ⏬What's Included in the Package:1x Coaxial Splitter, 2x Screws,2x Screws Plug,1x User Manual .

Tolmnnts

• Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
• Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards.
• 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only).
• 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
• PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators.

Reliable Cable Products

• 【Multi purpose】This digital Coax Splitter is designed for use with HD TV signals, satellite TV, and high speed internet modems as well as cable TV, and cable box, or antenna into multiple outgoing signals
• 【Not signal loss】：Perfect reception signal，high shielding structure for better anti-interference performance. Effective lowers digital noise and improves signal quality, reducing packet loss for other Devices
• 【 Product features】: low insertion loss, high isolation, high shielding, 2.4 Ghz 5-2400 MHz bidirectional network products. Zinc alloy die-casting, nickel-plated surface treatment, durable
• 【4 Outputs】Convenient and cost-effective 2-pack coax splitter 4 way provides spare or replacement units to use on different devices, including a MoCA adapter.
• 【Gold plated connectors】Gold plated Material MoCA splitter ensures a corrosion free connection and increases durability for the antenna splitter and compatible with RG59 and RG6 coax cable

WEVZENEY