10 Best Budget Jointer of December 2025

• Jointing plane for stock removal and truing long edges or levelling wide boards
• Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness
• Machined seatings eliminate movement and blade judder
• A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening
• Wooden handles and guidance knobs maximise user comfort

Faithfull

• Perfect for edge-joining panels, aligning boards, strengthening joints, and more
• Adjustable fence helps create biscuit slots at any height or angle
• Pre-set stops easily adjust to create slots for standard #0, #10, and #20 biscuits
• 8.5-amp motor rotates the 4-inch carbide-tipped blade at 10,000 RPM
• Set includes 50 biscuits of various sizes, a dust bag, a blow mold case, and a two-year warranty

WEN

• Heavy duty cast iron table provides a reliable and sturdy jointing surface for your workpieces
• Features a spacious 6-1/4 x 28-1/2-inch table and a 2-blade 6-1/8-inch cutterhead
• 10-amp motor generates up to 20,000 cuts per minute anywhere from 0 to 1/8 of an inch
• Adjustable 20-3/4 by 4-1/2-inch cast iron fence bevels up to 45 in. either direction
• Includes a push stick, a push block, an adjustable 2-1/2-inch dust chute, and a dust filter bag

WEN

• Purchase includes one stationary 13" Planer, in/out feed tables with fasteners (attached to the base of the Planer base), extra blades and dust hose adapter. Stand is not included.
• Three knife cutter head of the thickness planer delivers 30% longer knife life and makes knife change faster and easier
• Two-speed gear box of the wood planer allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chip off of the cutter head and exhausts them out of the machine
• 19-3/4-inch cast aluminum base is 2 times more rigid than a standard 10-inch base and folding tables
• Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user
• Material removal gauge and extra large thickness scale deliver accurate cuts with every pass
• Extra large turret depth-stop allows users to return to most frequently used thicknesses with ease
• Includes infeed and outfeed tables and an extra set of knives

DEWALT

• Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish
• Features a spacious 30-by-6-inch table
• Remove 0 to 1/8 of an inch of material with each pass
• Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees
• Includes an onboard depth-of-cut scale, two push blocks, 2-1/2 dust port, and a two-year warranty

WEN

• Motor: 1-1/2 HP, 120V, Single-Phase, 10A
• Maximum with of cut: 6 in.
• Maximum depth of cut: 1/8 in.
• Cutterhead type: spiral-style with 12 inserts
• Cutterhead speed: 12,000 RPM
• Table size: 6-1/4 x 30
• Dust port size: 2-1/2 in.
• Dimensions: 30 x 17-1/2 x 13-1/2 in
• Carbide insert size: 14mm x 14mm x 2mm

Shop Fox

• Helical-style Cutter head with 16 two-sided carbide inserts
• Large 19-3/4″ x 4-3/8″ Fence tilts 90° to 135°
• Safety on/off switch and easy read depth scale
• Full table size 30-1/2″ x 8-3/16″ extends to 51-1/2″ x 8-3/16″
• Portable as it weighs only 49 lbs

RIKON Power Tools

• 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
• Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
• Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
• Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
• Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods

Craftsman

• No More Cupped Woods. Create perfectly flat surfaces and edges quickly and hassle-free with the Wahuda Jointers. Experience smoother and accurate cuts even on tough or figured woods w/ Wahuda Tools.
• Cutting-Edge Sharpness. Our spiral cutterhead has 4-sided carbide inserts for sharper and quieter cutting precision. The standard blade size also allows for a cost-effective and simple replacement.
• Capable Steady Performance. Wahuda Jointers are powered with a 120V motor with a fixed 12,000 RPM. They are fully capable of handling edging, jointing, flattening, or tapering no matter the surface!
• Solid Built For Your Convenience. Our adjustable and expandable cast iron tables enhance stability even when working on longer, larger pieces, with a fence that tilts from 90 &135​° for ​versatility.
• Perfect For Job Sites Or Small Shops. Depending on your needs or your shop’s size, Wahuda Tools have 6, 8, and 10-inch wood jointers that will do the job right. They’re conveniently movable, too!

Wahuda Tools

• Protect hands and prevent kickback like never before
• Powerful high-friction durable grip for extreme hold
• Precision cutting and control down to 1/4" Ripping
• Fully adjustable for easy handling
• Work with small stock safely on the table saw, Router table, Jointer, & Band saw
• Made in USA. A true MICROJIG Innovation.
• Extended 3-Year . 100% Satisfaction .
• 3-Directional Force for total control of the workpiece
• Moving-Blade-Guard Hand protection
• Precise 1/4" thin rips
• Virtually eliminates kickback
• Work with small stock safely

MICRO JIG