10 Best Bonding Primer For Kitchen Cabinets of December 2025

• A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces.
• KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Viscosity - 93 - 100 KU. Roller - Smooth Surface - 3/8 - 1/2 inch nap.Roller - Porous Surface - 1/2 - 3/4 inch nap. Spray Pressure - 2,500 - 3,200. Spray Tip -.015 - .021 inches
• Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint.
• Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents.
• This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square feet per gallon.
• Use on properly prepared surfaces free of dust, grease, chalk, mold, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray.
• KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

Kilz

• The ultimate acrylic cabinet paint for a “factory-like” finish when refurbishing kitchen and bathroom cabinets, shelving, furniture, trim, and crown molding.
• Delivers an ultra smooth, durable finish.
• Super adhesion to hard-to-coat surfaces without primer.
• Durable satin cabinet finish that resists chipping, scuffing, food stains, grease & water.
• 350 - 450 square foot coverage per gallon.
• Apply when air, product, or surface temperature is above 50 °F (10 °C) and below 90 °F (32 °C).
• Before painting, review the INSL-X Cabinet Coat label for proper preparation and application tips.

INSL-X

• Multi-purpose latex exterior whole-house tannin stain blocking primer for new or weathered exterior wood.
• Excellent exterior primer for masonry surfaces, like stucco or concrete block.
• Low VOC, water thinned, blister and peel resistant, and high hiding
• Can be applied in low temperatures above 35 °F (1. 7 °C) but should not be used within 8 hours of air temperatures 35 °F (1. 7 °C) or lower
• Top-coat with latex or alkyd paints
• 300 - 400 square foot coverage per gallon
• Do not apply to a hot surface or if rain is threatening
• Do not apply if temperature is within 5° of dew point

INSL-X

• Item Weight: 3.7 lb
• Country of Origin: United States
• Brand name: Rust-Oleum
• Item Dimensions: 4.25"L x 4.25"W x 4.9"H

Rust-Oleum

• White bonding primer/sealer provides excellent adhesion
• Interior or exterior use
• All topcoats

Xim

• This item is Insl-X SXA110099-01 STIX Bonding Primer
• Used for Painting Supplies Paint & Stains
• This product is Manufactured in United States

INSL-X

• Fast-drying, multi-purpose Alkyd-based coating that primes and seals a variety of substrates and hard to block stains with excellent adhesion
• High hiding Alkyd primer that seals stains from water, smoke damage, and more
• Superior adhesion to glossy surfaces
• Quick drying; re-coat in as little as 1 hour
• 300 - 350 square foot coverage per gallon
• Apply when temperature is above 45 °F (7.2 °C)
• Do not paint if surface temperature is within 5 degrees of the dew point

INSL-X

• Specially designed for interior, residential surfaces in high-humidity, moisture and temperature environments including kitchens, bathrooms, powder rooms and laundry rooms.
• KILZ Kitchen & Bath Primer provides an enhanced mildew-resistant film that helps prevent mildew growth on the primer surface which may otherwise get "trapped" between the primer and paint coats.
• Kitchen & Bath Primer is white primer which helps provide a smooth and level finish. It offers high hide for color changes, blocks light to medium stains, promotes adhesion and seals porous surfaces.
• This is a low odor, very low VOC latex-primer that can be cleaned up with soap and water.
• This is a 1-gallon can of KILZ Kitchen & Bath Primer. Features high mildewcide content that will help prevent mildew growth kitchens, baths and other interior spaces prone to humidity and moisture.
• Use KILZ Kitchen & Bath on properly prepared interior residential surfaces including drywall, plaster, paneling, stucco, wood, brick, masonry, painted metal and more.
• KILZ Kitchen & Bath dries quickly and can be recoated after one hour.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

Kilz

• Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals.
• Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces.
• Bonds to "hard-to-coat" surfaces and can be top coated with almost any product.
• Fully cures in temperatures as low as 35 °F.
• 75 - 100 square foot coverage for interior or exterior use
• Low VOC and easy soap and water cleanup.
• Excellent enamel holdout, providing a great base for an even topcoat finish.
• Before painting, review the INSL-X STIX label for proper preparation and application tips.

INSL-X

• This item is Insl-X Stix Waterborne Bonding Primer Acrylic Interior/Exterior Glossy White 1 Qt
• Used for Painting Supplies Paint & Stains
• This product is Manufactured in United States

INSL-X