KILZ L211101 Adhesion High-Bonding Interior Latex Primer/Sealer, White, 1-Gallon, 1 Gallon, 4 l Read Review
- A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces.
- KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Viscosity - 93 - 100 KU. Roller - Smooth Surface - 3/8 - 1/2 inch nap.Roller - Porous Surface - 1/2 - 3/4 inch nap. Spray Pressure - 2,500 - 3,200. Spray Tip -.015 - .021 inches
- Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint.
- Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents.
- This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square feet per gallon.
- Use on properly prepared surfaces free of dust, grease, chalk, mold, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray.
- KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour.
- KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings.
Kilz