10 Best Boat Anchor of December 2025

• Penetrates deep in a variety of seafloor compositions
• Slip ring shank makes it simple to retrieve stuck anchor
• Recommended for boats 15-19 feet in length
• Fluke Length: 9 inch
• Stock Width: 12 ¾ inch

SEACHOICE

• 8.5 lb Hot Dipped Galvanized Fluke Anchor
• 98' Anchor Line - three strand - 5/16 (8mm) with stainless steel rope thimble (316 marine grade)
• 6.5 Feet of 1/4" (6mm) chain - Hot Dipped Galvanized
• 2 5/16" Shackles - Hot Dipped Galvanized
• Anchor measures 21.5" tall and 15" wide.

MarineNow

• 100' pre-wound double braid anchor rope
• Separate or integrated anchor roller
• Circuit breaker; Sealed membrane UP/DOWN switch
• Marine-grade battery wire included
• Assembly hardware and instructions

TRAC-Outdoor Products

• Breathable leather mesh upper
• Contrast stitching
• Comfortable foam insole for perfect feel
• Colorful printed anchor on rubber outsole
• Soft padded collar and tongue for comfort

Margaritaville

• READY TO LAUNCH KIT - For smaller boats (15-24ft) this is a perfect plug and play kit. No more worrying about buying the line, splicing the line to the chain, drilling a hole for easier retrieval. Just order this and go.
• SUPERB HOLDING POWER - Fluke style anchors are perfect anchors for sand or mud bottoms. The flukes articulate and will dig into the bottom, allowing these relatively lightweight anchors to hold tight. Just make sure you give it the opportunity to bury into the ground.
• PREDRILLED RECOVERY HOLE THEN GALVANIZED: Sometimes anchors get hung up and nothing is worse than having to cut your line because you can't free it. We predrill a recovery hole so you can recover it (without scuba gear) if it does get stuck. We drill the hole and then galvanize it, so you don't have to worry about rust and corrosion or drilling the hole yourself. We recommend attaching the anchor like the image using zip ties, so if you need to break it free you need to.
• WHAT'S INCLUDED: 75ft of 3/8in triple strand nylon rope that has an eye splice. 2 5/16 Hot dip galvanized bow shackles with holes for wiring shut. 6ft of 1/4in hot dip galvanized chain. 1 Hot Dipped Galvanized Steel Fluke Anchor.
• FROM A MINNESOTA BOAT MAKER - WindRider is a Minnesota based small boat manufacturer. We believe in standing behind our products, so if you ever have any issue, comment or concern you can feel confident you will talk to someone who is knowledgeable and passionate about boats - Here in the USA!

WindRider

• 30 lb. river anchor
• Designed to use a combination of weight and flukes for hold
• For use in lakes / rivers with fast currents and drift areas, holds in high
• Works on hard bottom surfaces , muddy or rocky bottom surface, and grass/weeds
• UV-resistant vinyl coating protects boat surfaces

Extreme Max

• Wide flukes are suitable for a variety of seafloor compositions
• Excellent weight to holding power ratio
• Recommended for boats 25-30 feet in length
• Fluke Length: 14-½ inch
• Stock Width: 21 inch

SEACHOICE

• 28 lb. navy anchor designed for excellent hold in heavy grass or weeds, rocks, or hard sand
• Designed with reverse action for quick, easy shank retrieval
• Anchor weight, flukes, and swivel action combine for superior hold
• Suitable for use in fresh or salt water applications
• Durable vinyl coating protects boat and anchor

Extreme Max