10 Best Benchtop Belt Sander of December 2025

• Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Belt tilts anywhere from 0 to 90 degrees
• Sturdy cast iron base prevents any heavy vibrations
• 4.3 Amp motor provides up to 3600 RPM
• Tension release lever provides for simple changes between sandpaper grits

WEN

• 1/3 HP, 120/240VAC motor, 3.5/1.75 amp, 3500 RPM
• 2-Inch x 42-Inch Belt speed 4400 SFPM
• 6-Inch PSA abrasive disc, 3500 RPM
• Belt arm operates vertically and horizontally

Palmgren

• MAINTENANCE-FREE: This sanding belt and disc were directly driven by the motor shaft, you need not adjust the belt tension, and you don't have to change the damaged belt like before
• INCREASE EFFICIENCY: The motor direct drive design is 25% more efficient than the traditional design, it can maximize the development of 3/4 HP fully enclosed induction motor, providing quiet but powerful performance
• MULTI-ANGLE SANDING: The belt can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your project, and the driven drum allows for sanding of curved work-pieces, it has a quick sanding belt replacement design & track control function
• TWO CAST AL WORKTABLE: Equipped with two cast aluminum workbenches for more convenient sanding, and the sturdy cast aluminum base with rubber foot prevents vibrations, to ensure a better experience, we suggest matching with our Y-Fitting Hose
• TWO-IN-ONE SANDING MACHINE: This sander meets CSA standards, two-in-one sanding machine includes both a 4 x 36-inch belt and a 6-inch disc, the angle adjustable work table with miter gauge can be used on both sanding disc and belt

Bucktool

• VERSATILITY: Precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles.
• LONGER LIFE: Graphite-covered steel platen runs cooler, increasing machine and belt life.
• EFFICIENCY: 4" dust port on the back of the base collects dust effectively from both the belt and disc.
• POWERFUL: 1-1/2 HP motor easily handles the toughest sanding operations.
• PORTABILITY: Built-in handles make machine relocation easier.

Jet

• Powerful 1/3HP Induction motor for optimum sanding outcome
• Adjustable belt tracking ensures true alignment
• Removable back plate facilitate sanding on curved or irregularly shaped work
• 0 Degree - 45 Degree tilting table for precise angle sanding
• Rubber feet absorb vibrations for stability

POWERTEC

• Sanding belt and disc were directly driven by the motor shaft, maintenance-free, you don't have to adjust the belt tension, change damage belt like before
• Motor direct-drive design can increase 25% sanding efficiency than the traditional design. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful performance. This Sander meets CSA standards
• The belt can tilt from 0 to 90 degrees for horizontal and vertical sanding depending on the needs of your project, the driven drum allows for sanding of curved work-pieces. Quick sander belt replacement design & track control. To ensure a better experience, we suggest matching with our Y-Fitting Hose
• Sturdy cast aluminum base with rubber foot prevents vibrations. Side Al table can tilt & fix work on both disc & belt
• Two-in-one sanding machine includes both a 4 x 36-inch belt and a 6-inch disc. Angle adjustable work table with miter gauge used on the sanding disc

Bucktool

• [HORIZONTAL & VERTICAL SANDING] The spacious 4” x 36” belt platform raises and lowers from 0-90° to accommodate almost any project
• [BEVEL EDGES] The sanding table adjusts from 0-45° for smoothing out beveled edges—you’ll have the nicest picture frames in the business
• [HEAVY INDUCTION MOTOR] Powerful 4.3-amp motor provides plenty of power to sand down all your woodworking projects
• [EASY BELT CHANGES] Quick-release tension lever lets you easily change out sandpaper grits for different projects
• [SAFETY SWITCH] Prevents accidental starts so you can confidently leave your shop when you’re done for the day and not have to worry
• [WHAT’S INCLUDED] Comes with: 1pc hex key, 1pc miter gauge, 1pc sanding disc, and 1pc sanding belt

Rockwell

• Sanding belt and disc were directly driven by the motor shaft, maintenance-free, you don't have to adjust the belt tension, change damage belt like before
• Motor direct-drive design can increase 25% sanding efficiency than the traditional design. 3/4 HP total enclosed induction motor supplies silent but powerful output
• The belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work-pieces. Quick sander belt replacement design & humanized track control
• Sturdy cast aluminum base with rubber foot prevents vibrations. 2 dust ports allows a dust-free operation when connecting with a dust collector. To ensure a better experience, we suggest matching with our Y-Fitting Hose
• Two-in-one sanding machine includes both a 4 x 36-inch belt and an 8-inch disc. Angle adjustable work table with miter gauge used on both sanding disc and belt

Bucktool

• 7-amp variable speed motor rotates the belt anywhere from 787 to 1312 feet per minute
• Easily attaches to your favorite benchtop for an upward facing stationary belt sander
• Lock-on power switch allows for continuous sanding without requiring a constant grip on the trigger
• Includes a dust collection chamber, a dust port adapter, a dust port reducer, two benchtop clamps, and 80-grit sandpaper
• Backed by a two-year warranty

WEN

• Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Belt tilts anywhere from 0 to 90 degrees
• Features an open-style steel frame design
• 3.2A motor provides up to 1150 FPM
• Tension release lever makes for simple changes to Sandpaper grit

WEN