10 Best Beginner Table Saw of December 2025

• [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts
• [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site
• [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between
• [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• [ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip

WORX

• [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
• [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
• [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
• [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
• [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
• [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut

Rockwell

• Plunge-cutting circular saw for cutting solid wood and plywood when paired with the Kreg 62" Guide Track
• Powerful 12-amp, 120-volt variable speed motor with load compensation
• Safe with fully-shrouded , retracting blade, riving knife, electronic blade brake, and anti-kickback control
• Blade-left design is optimized for right-handed users, and provides superior cutting visibility and control
• High-capacity cutting with 2 1/8" maximum cut at 90° and 1 1/2" at 45°

KREG

• Stainless steel miter detent plate with 14 positive stops
• Precise miter system and machined base fence support
• Tall sliding fence supports 4-1/4 in. Base vertically
• Bevels 0° - 48° to the left and 0°- 3° to the right
• 2 in. X 6 in. Dimensional lumber cross cut capacity at 90° and 2 in. X 4 in. Dimensional lumber at 45°

DEWALT

• Laser cutline guide for fast and accurate cuts
• 9 positive stops for setting common miter angles
• Powerful 15 amp motor with 4,500 RPM
• Table extension with left/right extension rails for long, large work pieces
• Quick-mount system for quick and easy setup on SKIL miter saw stand (3302-02)

Skil

• 【UpgradeTable Saw】: Compared with most mini table saws on the market, the table saw of this one is larger and wider - 11.81 * 9.84 Inch, and it's smooth and burr-free, and of fine workmanship, high-quality materials and higher work efficiency.
• 【High-precision Double-sided Saw Blade Clamp】: In order to accommodate different inner holes of the saw blade, the diameter of one side of the blade clamp is 0.79 inch, and the diameter of the other side is 0.63 inch.
• 【Professional Jewelry Polishing Machine】: This polishing machine is designed to be high-load for jade polishing and carving and large-size stone cutting. The complete accessories make it suitable for cutting, grinding, carving, polishing of jewelry,aluminum,chrome, precious metal, jade, wood, plastic, paper, model and other different items.
• 【 10000RPM Speed 】: The motor speed of this high-efficiency gem polishing machine is 10000RPM. If with speed adpater( package doesn't contain), the output speed can be adjusted. Input voltage: AC110-240V. (You need to buy the adpater yourself.)
• 【Product Warranty】: We provide 6-month warranty service, if the product has any problems during use, we will return the product for you.

ETE ETMATE

• Flexible - power of corded. Freedom of cordless. The world's first battery that automatically changes voltage when you change tools
• 24" of Rip capacity for ripping 4x8 plywood or osb sheets
• Rack and pinion telescoping fence rails make fence adjustments smooth and accurate
• Metal roll cage base offer greater durability than plastic Bases
• Power-loss reset prevents accidental re-starts following a power disruption when the switch is left in the "on" position
• Battery & Charger Sold Separately

DEWALT

• Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Variable speed goes from 400 to 1600 strokes per minute
• Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

WEN

• Portability: Compact size for ease of transportation and storage
• Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
• Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets
• Power: 15 Amp, 5800 rpm motor
• Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use
• Guaranteed tough: Metal roll cage ensures job site durability

DEWALT

• If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process.
• Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!
• UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do.
• The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect sub-fence on the crosscut sled. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut.
• We have also included a full color and detailed how to guide book to help you with the crosscut sled building process. Each kit comes with 2 each 19” long by 3/4” by 3/8” UHMW bars, 2 each 12” long mini tracks, 1 each knob, 1 each 1/4” by 20 tpi bolt and a how to build your own crosscut sled guide book. Make your crosscut sled to the size you want or need for your table saw and your specific cutting needs. Please Note, the bars do NOT FIT RYOBI table saw track slots.

Fulton