10 Best Bedjet Aromatherapy Upgrade Kit of December 2025

Victron Energy

• Only for CoolBots sold after September 2011
• These sensors have plug jacks (like for earphones)
• They plug into the BOTTOM of the CoolBot
• Don't choose this if your coolbot sensor goes through the TOP of you coolbot
• This is a replacement wire for either the ROOM sensor *OR* the FINS Sensor

COOLBOT

• Cooling Mattress Pad – The pressure-activated self cooling body pad instantly provides cool relief. Simply lie on the pad to experience the cooling sensation.
• No Water, Electricity or Refrigeration Required – Use the cooling mattress pad in bed if you are suffering from a fever, hot flashes, night sweats and cannot get to sleep. Our patented cooling gel pad technology automatically recharges after 15-20 minutes of non-use.
• Gel Sleeping Pad – The cooling gel mattress pad provides menopause relief for hot flashes and are also ideal for summer sleeping, post-exercise, soothing sore muscles and achy joints. Safe for all ages and works for pets too.
• Simple To Use – Place the cooling gel pad under or over your bed sheets to experience 1-3 hours of cool relief, depending on your room conditions. Refrigerate the cooling mat to help you stay cool.
• Easy Care – The cool gel pad measures 43.4 x 27.6 inches. Lightweight and perfect for home, the cool gel mattress pad can also be taken to the gym or used in the car. Easily clean using a mild soap and water.

Cool Care Technologies

• The magnetic plate are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120℃ on the bed.
• Double-sided PEI: Flexible PEI print bed has double-sided PEI coating, both sides can be use,both side is textured.
• When printing is complete, let the plate cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
• The size of flexible PEI build plate 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines.
• Easy to install: Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.

POJECITY

• WATER-BASED SYSTEM: Utilizes an adjustable, water-based system to regulate the surface temperature of your existing mattress, by actively circulating water through silicone micro-tubes in the pad, thus providing a more comfortable sleeping environment!
• IMPROVE SLEEP QUALITY: Your body needs a physical change to signal that it’s time for sleep. This change is a drop in temperature. Use the heat-trapping properties of bedding materials to your advantage by cooling the mattress surface & allowing the blankets to act as insulation. The wide temperature range – 55-115F (13-46C) – allows you to get improved, restful sleep! [*Not meant to replace conventional A/C. Peak operating performance can be impacted by ambient temperature and humidity.]
• IMPROVE PERFORMANCE: Allows for temperature control in one-degree increments so you can reach your ideal sleep temperature and experience the performance and productivity benefits of enhanced, rejuvenating REM sleep!
• AID HEALTH EFFORTS: Designed with recovery benefits from cold therapy in mind, customer testimonials describe how its cooling capabilities assist in reducing sleeplessness from hot flashes, menopause, body pain & night sweats, allowing a more relaxing sleep experience! Never wake up hot or tired again.
• ENERGY EFFICIENT: With a power-rating of 80 Watts per cube, significantly lower than A/C, you can enjoy the benefits of energy efficiently sleeping at your ideal temperature!

Chili Technology

• The Complete Bundle - Our Essence Diffuser has a 400 ml capacity and uses state of the art wave diffusion technology to atomize essential oils for ultimate wellness. The Essence diffuser includes 7 ambient light modes with two intensity settings for 14 different light combinations. It also includes 4 timer settings and a convenient auto shutoff feature for low water levels. Essence is made of BPA free plastic with a beautiful printed wood grain design.
• Ancient Therapies Delivered As Intended By Nature - Our essential oils are formulated using high quality plants sourced from various regions of the world, such as lavender from France and Tea Tree from Australia. Our modern heat-less diffuser delivers the therapeutic properties of these plant oils as nature intended by using modern ultrasonic waves to atomize the oils instead of burning them with heat.
• 10 Essential Plant Oils - Our Top 10 essential oils include lavender, eucalyptus, tea tree, orange, peppermint, lemongrass, jasmine, nutmeg, clove, and spearmint oils. All oils are therapeutic grade come in amber 10ml jars to protect from sun degradation
• No Additives or Fillers - Absolutely zero cheap additives or fillers are used in creating our oils. We use local harvest (when possible).It takes longer but is better for the environment and creates a better essential oil. We employ a variety of extraction processes such as steam distillation and cold press depending on plant harvested.
• What's Included – 1 400ml ultrasonic essence diffuser, 10ml lavender essential oil, 10ml eucalyptus essential oil, 10ml tea tree essential oil, 10ml orange essential oil, 10ml peppermint essential oil, 10ml lemongrass essential oil, 10ml jasmine essential oil, 10ml nutmeg essential oil, 10ml clove essential oil, 10ml spearmint essential oil, power cable, and manual.

Pure Daily Care

• Hassle-Free and Practical Approach: The mattress band was designed as a hassle-free way to keep your bottom fitted sheet from riding up off the corner and hold sheets on the bed. More practical and easier to install than sheet suspenders, sheet clips or sheet straps that go under your mattress.
• Right Amount of Tension: The elastic rubber bed band for sheets is engineered with patent pending embossed ribbing that uses a horizontal tension design to secure bedding. The sheets tighteners band are designed to accommodate mattress sizes ranging from Twin/Full to King, and can even work with adjustable beds.
• Durable and High-Quality: Made of natural rubber material, the bed sheet tightener band can firmly keep top sheets or other bedding from sliding around.
• A Totally Unique Concept: Unlike sheet strap type products, Rubber Hugger bed band fits around the entire circumference of the mattress, securing the bottom fitted sheet and is conveniently hidden by your comforter.
• Get Comfortable, Sleep Better: The Rubber Hugger sheets holder fits effortlessly to any mattress and removes all the fuss from loose sheets, helping you get a comfortable sleep.

RUBBER HUGGER

• The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
• The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.
• Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
• Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
• The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines.

HICTOP

• STAY COOL: Uses chilled water-circulation to cool down your bed, reducing sleeplessness from night sweats, hot flashes & menopause, allowing a more relaxing sleep experience
• COMFORTABLE & HEALTHY: The mattress cooling pad is made of 100% organic cotton, with a medical-grade soft silicone tube system inside, Not the cheap PVC material
• SAFE & NEVER LEAK: Use high-quality silicone tube instead of PVC material, PVC is a bit stiff, it is easy to wear and leak. No wires, no electro-magnetic fields in your bed
• MORE POWERFUL COOLING: Fan and surface area increasing membrane accelerates evaporation process, capable of chilling water 7 to 12F below room temperature
• BUY WITH CONFIDENCE: 60-Day free return or exchange If for any reason you are not satisfied with the purchase of the mattress cooling system

ANNI STAR

• Sleep better with on-demand cooling, warming and sweat drying comfort right in your bed, works on any size bed or mattress including adjustable beds, simple and easy to use
• Powered ventilation cooling rapidly wicks body heat and moisture out of the bed for awesome cooling relief, great solution for hot sleepers, hot-flashes and night sweats
• Heating mode gives a deep sauna like warmth in just seconds, great therapy for cold feet and cold legs, safer alternative to electric blankets and warms bed 15x faster with air
• Biorhythm sleep technology enables automated smart temperature control, sleep better by programming different temperature settings for each hour of the night
• NEW AND IMPROVED BEDJET 3 is 30% smaller than prior V2 model. Includes the most advanced remote control in the sleep industry with color LCD screen and back-lit keys. NOTE: Reviews posted prior to August 2019 are for prior V2 model. Amazon's current return policy (30 days) applies when purchased from Amazon.

BedJet