10 Best Battery Smoke Detector of December 2025

• Voice Alarm –Announces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected. Alarm announces “Fire ” when a smoke or fire hazard is detected and announces “Warning Carbon Monoxide” when a CO hazard is detected
• Combined Carbon Monoxide and Smoke Alarm – A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home décor attractive.
• Audio alarm: 85 dB at 10 feet. Test/Reset Button and LEDs – Tests alarm circuitry and triggers the voice announcement. Flashing green for normal operation and flashing red for alarm condition. Humidity Range: 10 percent to 95 percent relative humidity non-condensing
• Battery - Provides protection even during power outages when many fire and carbon monoxide incidents occur. The unit warns of a low battery condition by announcing “low battery” and by initiating an alarm chirp and activating a flashing red LED. The battery door will not close unless the batteries are properly installed. Note : The date printed on the item is manufacturing date, not the expiration date. Refer to the PDF attached below in Technical Specification for Manual.
• Voice Announcements - Hush Feature temporarily silences nuisance alarms with “HUSH MODE ACTIVATED” and “HUSH MODE CANCELLED” voice announcement. If the alarm had detected a CO level of 100ppm or higher, the unit will announce “CARBON MONOXIDE PREVIOUSLY DETECTED” to warn of the CO incident, when the Test/ Reset button is pressed. Temperature Range: 40˚F (4. 4˚C) to 100˚F (37. 8˚C). Voltage (volts): 4. 5

Kidde

• 2-IN-1 PROTECTION: Equipped with both photoelectric and electrochemical CO sensors that work independently of each other; instantly notifies you when dangerous smoke or CO concentration is detected while minimizing false alarms; provides the ultimate protection from 2 deadly threats, all contained in 1 unit
• BUILT-IN 10-YEAR BATTERY: Provides 10 years of continuous power with a built-in lithium battery, saving on energy while remaining eco-friendly; saves you from constantly having to change batteries or wonder if your alarm is still functioning
• ACCURATE, RELIABLE & HIGHLY SENSITIVE: The X-Sense combination smoke and co alarm has been redesigned from the inside out; it will ensure that smoke triggers the alarm instead of interference by taking 3 separate smoke samples from the surrounding air; a full 360 ° ring of air intakes ensures complete detection with no blind spots
• LED INDICATOR: Clearly informs you of the working status of the alarm with its 3-color flashing LED indicator (green LED indicates normal operation, red LED indicates the alarm status, and yellow LED indicates a fault), ensuring the safety and security of your home 24/7
• LARGE LCD DISPLAY: Clearly displays battery level and the real-time CO levels in PPM (parts per million) taken from the surrounding air, with an updated measurement taken every 10 seconds

X-Sense

• Note: A loose neutral (white wire) connection within the home junction box could prompt a device malfunction
• Equipped with an ionization sensor, this smoke alarm reliably detects smoke from fast flaming fires and alerts you with an 85 decibel alarm
• To ensure complete protection make sure to place one on each level of your home and in each bedroom
• Can connect to other compatible BRK or First Alert smoke detectors, to ensure all alarms will sound when smoke is detected
• Simple to use, with a single test/silence button, and side load battery compartment; Tamper resistant locking brackets and universal mounting brackets make installation easy
• Rigorously tested to meet UL standards. Emits T3 pattern
• Keep your family safe with this 6 pack of hardwired smoke alarms; the battery backup means constant monitoring, even if there's a power failure
• Faster turnarounds on job sites with the easy-to-install, most-trusted alarms in home safety
• First Alert has been the most trusted brand in home safety since launching the first residential smoke alarm in 1958 (Based on a First Alert Brand Trust Survey in February 2018)

FIRST ALERT

• Keep your family safe with this 3-pack of hardwired smoke and carbon monoxide alarm; the battery backup means constant monitoring, even if there's a power failure
• Features an electrochemical carbon monoxide sensing technology as well as an ionization sensor that detects the fine particles of a fast-burning fire
• Indicator lights on the face of the unit display the presence of smoke or carbon monoxide, while an 85-decibel siren provides a clear, loud warning upon detection
• Can connect to other compatible BRK or First Alert detectors, to ensure all alarms will sound when threat is detected
• Simple to use, with a single test/silence button, and side-load battery compartment; Tamper-resistant locking brackets and universal mounting brackets make installation easy. Dust cover
• First Alert has been the most trusted brand in home safety since launching the first residential smoke alarm in 1958 (Based on a First Alert brand trust survey in February 2018)
• Faster turnarounds on job sites with the easy-to-install, most-trusted alarms in home safety

FIRST ALERT

• Battery operated Ionization sensor compact smoke alarm
• 9 volt battery, mounting hardware and installation guide
• Four inch diameter discreet design
• Test button tests unit's electronic circuitry horn and battery function
• UL listed and is backed by a 3 year limited warranty
• Easy installation
• Battery operated 9V battery included
• Test button tests unit's electronic circuitry horn and battery function
• Four inch diameter discreet design. Audio Alarm- 85dB at 10ft. Temperature Range- 40˚F to 100˚F (4°C to 38°C).Humidity Range- up to 85% relative humidity (RH)
• Battery operated 9V battery included
• Test button tests unit's electronic circuitry horn and battery function
• Four inch diameter discreet design
• Easy installation
• Meets the UL requirements and widely-accepted safety standards

Kidde

• Sealed-in lithium battery – Sealed-in lithium power supply; No battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm
• Self-activation – Alarm automatically activates when attached to the mounting bracket, HushTM – Will temporarily silence nuisance alarms and will not allow hush mode to be activated unless the unit is in alarm mode
• Alarm memory – Rapidly flashing LED alerts user if the alarm has sounded since the last time the test/reset button was used. Temperature Range-40˚F (4.4˚C) to 100˚F (37.8˚C)
• End of life warning – Alarm chirps every 40-45 seconds indicating the alarm is in need of replacement, Tamper resist – (when activated upon installation) effective in preventing someone from removing the unit from the mounting bracket
• Test/reset button – Tests unit’s circuit operation and resets memory after an alarm condition occurs, LED – A flashing red indicator light with four modes of operation: standby, alarm mode, hush mode, and memory set
• Sealed in lithium battery never replace battery over the ten-year life of the alarm
• Self activation alarm automatically activates when securely attached to the mounting bracket
• Smart hush temporarily silences nuisance alarms and will not allow hush mode to be activated unless the unit is in alarm mode
• Rapidly flashing red LED alerts the user if the alarm has sounded since the last time the test reset button was used
• Kidde's smoke alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards

Kidde

• Keep your family safe with this battery operated smoke and carbon monoxide alarm; Battery powered alarms provide continuous monitoring of CO levels, even if there's a power failure
• Features an electrochemical carbon monoxide sensing technology as well as a photoelectric sensor that detects the larger particles of a smoldering fire
• Indicator lights on the face of the unit display the presence of smoke or carbon monoxide, while an 85 decibel siren provides a clear, loud warning upon detection
• Battery operated unit installs quickly and easily without an electrician. Low battery signal mute, quiets low battery signal for up to 8 hours
• Simple to use, with a single test/silence button; EZ access battery drawer allows you to change battery without removing alarm from ceiling
• 7 year limited warranty; Equipped with end of life signal chirp, so you know when it’s time to replace the unit for safety; All first alert alarms are rigorously tested to meet UL standards
• It can ship within the US except New York
• First Alert has been the most trusted brand in home safety since launching the first residential smoke alarm in 1958 (Based on a First Alert Brand Trust Survey in February 2018)

FIRST ALERT

• Help keep your family safe with this battery powered smoke alarm featuring an ionization sensor for smoke detection; a loud 85 decibel alarm sounds when smoke levels are elevated
• Ionization sensor is effective in recognizing smoke from flaming fires such as paper and grease fires
• Battery operated alarm unit provides continuous monitoring even if there's a power failure; Plus, it's easy to install
• Tamper resistant alarm also features a single test/silence button, side battery door, and missing battery guard
• To ensure complete protection make sure to place one on each level of your home and in each bedroom
• It can ship within the US except New York
• First Alert has been the most trusted brand in home safety since launching the first residential smoke alarm in 1958 (Based on a First Alert Brand Trust Survey in February 2018)

FIRST ALERT

• Easy installation – No wiring required
• Battery operated (9V battery included) – Provides continuous protection even during power failures
• Flashing LED – Indicates alarm is receiving power
• Test button – Verifies battery and alarm operation
• Low battery indicator – Chirps when battery needs replacement

Kidde

• Install these Kidde Worry-Free Smoke Alarms to provide your home with reliable protection against smoke and fire. The alarms are equipped with sealed-in lithium batteries that are designed to last for the life of the alarms. Photoelectric sensors can detect fire particles, which are associated with slow, smoldering fires, quickly. Once the alarms are attached to the mounting brackets, they activate automatically for simple use. Product Features: Provides reliable protection Sealed-in lithium b

Kidde