10 Best Air Compressor For Framing of December 2025

• CORDLESS AIR COMPRESSOR: The BTFP02012 is at 6 gallons, 150PSI, and 2.6SCFM with a high efficiency motor.
• BRAD NAILER: The SB-1850BN drives 18-gauge Brad Nails from 5/8" to 2" for a wide variety of applications
• STRAIGHT FINISH NAILER: The SB-1664FN drives 1-1/4- to 2-1/2-inch, 16-gauge finish nails.
• HEAVY DUTY CROWN STAPLER: The BTFP71875 drives heavy duty 3/8" Crown staples from 1/4" to 9/16"
• AIR HOSE: 15-foot, 1/4" x 25' PVC air hose with fittings air hose, and fittings offer plenty of length for maneuverability
• WARRANTY: This kit is covered by a 1-year limited warranty for peace of mind

BOSTITCH

• Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer; Power Source: Pneumatic
• 14 1/4 by 20 1/2 inches; 8.1 pounds.Operating Pressure:80 120 psi
• 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer
• 14 1/4 by 20 1/2 inches; 8.1 pounds; 7 year limited warranty

BOSTITCH

• Quiet Series design at only 58 dB for operator and crew comfort; ideal for indoor use
• Runs at a lower RPM (1, 750) resulting in longer motor and pump life
• Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments
• Oil-free dual-piston pump designed for maintenance-free operation
• Lightweight design for increased job site portability

Makita

• 165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump. SCFM @ 40 PSI 3.7 SCFM
• High efficiency motor for easy start up in cold weather or extension cord application. [14 ga or larger, 50 feet. (15.2 m) or less]
• 75.5 dBA noise level for a quiet work setting
• High flow regulator and couplers to maximize air tool performance
• Power Supply 120V, 60Hz, 10 amps., universal motor. The air compressor should be located at least 12 inch away from the wall or other obstructions that will interfere with the flow of air

DEWALT

• Low maintenance, oil free, direct drive pump has a patented two piece cooling system which extends the life of the pump
• 5-Horsepower Honda OHC/OHV premium residential gas engine
• 155 PSI max pressure for optimum tool performance. Application Use-Air Brushing,Blow Cleaning,Bolting/Wrenching,Brad Nailing/Stapling,Finish Nailing,Framing Nailing,Hobby Nailing,Inflation,Roof Nailing
• "Pontoon" style tank design with two 2-Gallon tanks for job-site portability
• Maximum pressure: 155 PSI; CFM at 90 PSI: 5.0; CFM at 40 PSI: 6.9; horsepower: 5.0; engine type: Honda OHC/OHV.CC: 160

Industrial Air Contractor

• Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance
• Powerful 3.0 HP* motor produces 6.5 CFM at 90 PSI for increased productivity
• Pump is oil lubricated for cooler running temperatures and reduced wear
• Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
• Folding handle with low profile design for easy storage with handle folded
• Rugged wheels for job site portability
• Built in storage compartment conveniently stores air fittings and accessories
• Air hose wrap stores 50 feet of 3/8 inches air hose with handle folded or upright
• Tool hangers store tools when not in use
• Large automotive style industrial air filter for increased air intake and greater efficiency
• Roll cage construction for extra protection to pump and motor assembly
• Oil sight glass for fast, easy and efficient maintenance
• Finned discharge tubing for increased heat dissipation and reduced moisture in the air
• Lever handle ball valve tank drain valve improves upon standard petcock design for easier maintenance
• Convenient oil drain at the front of the pump for easy access
• Built in thermal overload for additional motor protection
• Compressor Oil (181122 A)
• 1/4 inches Universal Quick Coupler (447013 E)
• AC310H
• MAC2400
• MAC700
• Folding handle: Low profile for easy storage with handle folded
• Rugged wheels: Job site portability; One year manufacturer's warranty
• Built in storage compartment; Conveniently stores air fittings and accessories
• Air hose wrap: Stores 50 feet of 3/8 inch air hose with handle folded or upright
• 120V; 13.8 Amps and 1800 watts

Makita

• 150 psi max tank pressure stores more air in the tank for longer tool run times
• 2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217
• Six-gallon pancake-style tank for stability, includes water drain valve and rubber feet
• Low-amp 120-volt motor starts easily in cold weather or with extension cord
• 150 psi max tank pressure stores more air in the tank for longer tool run times
• 2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217
• Six-gallon pancake-style tank for stability, includes water drain valve and rubber feet
• Low-amp 120-volt motor starts easily in cold weather or with extension cord
• Durable oil-free pump for long life and no maintenance

PORTER-CABLE

• Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance
• Low AMP draw reduces incidences of tripped breakers at start up. The 4.2 gallon twin stacked tank sustains an operating pressure of 130 PSI, and delivers 40 PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers
• Pump is oil lubricated for cooler running temperatures and reduced wear. Built in thermal overload for additional motor protection. Compressor Oil (181122 A). 1/4 inches Universal Quick Coupler (447013 E)
• Roll cage construction provides complete protection to withstand extreme jobsite environments. Lever handle ball valve tank drain valve improves upon standard petcock design for easier maintenance
• Large automotive style industrial air filter for increased air intake and greater efficiency. Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance. Oil sight glass for fast, easy and efficient maintenance
• Oil lubricated: Cooler running pump, minimizes wear
• Durable cast iron cylinder reduces wear and increases pump life; Removable for easy maintenance
• Powerful 2.5 HP 4 Pole motor produces 4.2 CFM at 90 PSI for increased productivity
• Large automotive style industrial air filter for increased air intake and greater efficiency
• Pump runs at lower RPM (1,730) resulting in lower noise (79dB) and improved pump durability

Makita

• 6 gallon pancake maximizes portability and stored air
• Durable, Oil free pump for long life and no maintenance
• 150 Max PSI to ensure adequate cut in pressure for a variety of applications
• 2. 6 SCFM @ 90 PSI allows for quick compressor recovery time. Voltage - 120 V
• Easily starts up in cold weather
• 13 piece accessory Kit includes: 25' X 1/4inches Pvc air Hose with coupler and plug assembled, tire chuck with plug, blow gun with plug, tire gauge, blow gun with OSHA safety nozzle, rubber tip, three inflator adaptors
• 1 Year Limited Warranty, refer to "Warranty & Support" section below for full details

Craftsman

• BTFP02012 Compressor 150 max PSI 6.0 gallon tank and 2.6 SCFM delivered at 90 PSI pump
• SB-1850BN 2" 18 GA brad nailer drives 18GA brad nails from 5/8" to 2" for a wide variety of applications
• 1/4" x 25' PVC air hose with fittings
• High efficiency motor for easy start up in cold weather
• 78.5 dBA** operational noise level for a quiet work environment

BOSTITCH