10 Best 20v Cordless Drill of August 2025

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers 2 speeds (0 450 & 1,500 rpm) for a range of fastening and drilling applications. Chuck Type - Keyless
• 1/2 inches single sleeve ratcheting chuck provides tight bit gripping strength
• Ergonomic handle delivers comfort and control.Tool Width: 1.9 inch
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 Ampere hour

DEWALT

• Ideal for drilling into wood, metal plastic and all screw driving tasks
• Chuck Size: 3/8 inch; Clutch Setting: 11; Included Components: (1) LDX120 Drill/Driver, (1) LBX20 20V MAX* Lithium Ion Battery, (1) LCS20 Charger, (1) Double Ended Bit; Power Source: Cordless
• Lithium Ion Technology & 20V MAX: Lighter, more compact, no memory, longer life
• 11 Position Clutch: Provides precise control for drilling into wood, metal, plastic, and all screwdriving tasks
• Compact and Lightweight: Less fatigue and allows users to drill / screw in confined spaces. Part of the 20V MAX System A System that Demands Attention
• Variable Speed: Allows countersinking without damaging material

BLACK+DECKER

• Ergonomic Design: Lightweight Tools Designed to Fit the User’s Needs
• Increased Visibility: The DCF885 Features a Built in Led with 20 Second Delay After Trigger Release
• Includes: (1) DCD771 Drill/Driver, (1) DCF885 1/4 Inches Impact Driver, (2) 20V Max Lithium Ion 1.3 Ah Battery Packs, 20 Volt Max Charger, and (1) Kit Bag
• ONE HANDED BIT LOADING: THE DCF885 has a 1/4 inches hex chuck and accepts 1 inches bit tips, Power Tool Type: Cordless
• High Performance Motor: The DCD771 Delivers 300 Unit Watts out (UWO) of Power Ability Completing a Wide Range of Applications

DEWALT

• Ideal for drilling through or screwing in wood, metal, and plastic, soft grip handle provides added comfort during use
• The lithium ion battery holds a charge for up to 18 months
• 30 accessories include drill and screwdriving bits, nut drivers, and magnetic bit tip holder
• Kit also includes one 20 volt lithium ion battery and charger;Uses:Drilling through wood, metal, and plastic, Screwdriving though wood, metal, and plastic.RPM : 0 650 rpm
• Chuck Size: 3/8 in; Clutch Setting: 24; Included Components: LD120 20Volt MAX Lithium Drill/Driver, (1) LB20 20Volt MAX Lithium Ion Battery, (1) LCS20 Charger, (6) Brad Point Drill Bits, (10) 1 inch Screw driving Bits, (9) 2 inch Screw driving Bits, (4) Nut Drivers, (1) Magnetic Bit Tip Holder; Power Source: Cordless

BLACK+DECKER

• ☞【Proudly Present KIMO Battery】Over 25 years, KIMO has dedicated a whole engineering team that keeps updating its batteries to the best of its kind. It’s guaranteed that the life expectancy of each KIMO battery is at least 1,000 cycles. Stop worrying about dying batteries or batteries that won’t charge after minimal usage. KIMO’s got your back!
• ☞【21+1+1 Clutch & 2 Variable Speed】Equipped with 3 functions, screwdriving, drilling and impact drilling, this 2 variable speed (0-350RPM, 0-1350RPM) 21+1+1 clutch Drill Driver is your no.1 helper for your precise work around the house. Whether it’s household reconstruction, renovation, garden work or garage repairs, consider getting this KIMO drill as an one-stop solution.
• ☞【All Copper Motor & MAX 330 In-lb Torque】KIMO Cordless Drill features an All-Copper Motor that ensures stable operations and is much lighter, cooler and more efficient than aluminum motor drill drivers. Maximum 330 in-lb torque is ideal for drilling through or screwing in wood, metal, and plastic, fulfilling a wide range of needs.
• ☞【Compact, Lightweight 2 lbs Design, Built-in LED & Reverse Control】Compact (7-in front to back) design fits into tight areas, ultra lightweight (2.2-lb) minimizes user fatique. Comes with built-in LED light for increased visibility in enclosed work spaces or any dark environment.The forward/reverse switch allows screws to be removed or replaced once they are secured.
• ☞【46 piece Accesory come with KIMO Drill Driver Kit】Get your KIMO power kit without worrying about purchasing other accessories, KIMO Drill/Driver Kit includes 3 Brad Point Drill Bits, 6 Twist Drill Bits, 33 screwdriver bits, 3 Nut Driver Bits, 1 Carrying Bag, 1 Fast Charger, 1 Battery. We are confident that our docking are manufactured under strict quality standards to give our customers best experience.

K I M O.

• 1/2 inch two speed drill/driver. High performance motor delivers 283 Units Watts Out and 0-350/0-1,500 RPM.
• Compact design 8.25 inch long and 3.5 lbs. Drill features an ergonomic handle design, LED light and bit storage
• 1/4 inch impact driver delivers 1450 in/lbs of torque, 0-2,800 RPM and 0-3,100 BPM. Quick load chuck for one handed bit changes.
• Compact design 6.9" long and 3.3 lbs.Impact driver features an ergonomic handle, LED light and bit storage
• 20V MAX 1.3 Ah lithium ion batteries included. Professional grade batteries deliver more runtime and are lighter weight than traditional NiCd batteries

PORTER-CABLE

• 2.0 Ah Fast Charging Battery: The kit comes with 20-Volt 2000mAh large capacity Li-ion battery, you never need to worry about running out of power in the middle of a project. 2.4A fast charger can charge one battery in as little as 1hour.
• 18+2 Torque Adjustment: This 20V Drill Driver can provide powerful torque and also allows you to choose between two speed setting (0 – 360 RPM or 0 – 1,300 RPM), so you will always have the power you need. The clutch has a total of 18 different torque settings and 2 modes (driving, drilling), in order to avoid incidents where you apply too much power and then wind up stripping the screw.
• 3/8” Keyless Chuck & Variable Trigger: 3/8” keyless ratcheting chuck can hold most bits also makes them ideal for general-purpose drilling. Variable speed trigger allows you to select different speeds depending on the task at hand.
• Ergonomic Handle and Led light: The anti-slip grip ergonomic handle is made of soft rubber, which fits nicely in your hand. Comes with a trigger-delay LED work light which stays on for ten seconds after you’ve let go of the trigger, useful in dark basements or underneath a vehicle.
• What you get: 1*20V Cordless Drill Driver, 1*20V Li-ion Batteries, 1* 2.4A Quick Charger, 10*2” Screwdriver bits, 6* twist drill bits

WORKPRO

• ☘【2pcs 2000mAh Li-Ion & Fast Charger】2pcs 20V 2000mAh large capacity Lithium-Ion batteries with power indicator. And 2A ultra fast charger keeps cordless drill constantly running, excellent temperature management system keeps the batteries cool
• ☘【530 in-lbs Torque & 24+1 Clutch & 2 Speed Adjustment】Powerful 4-pole copper motor delivers 530 in-lbs(60Nm) peak torque; 24+1 position clutch generates 150% precision of torque adjustment than regular 16+1 cordless drill; 2 speed transmission (0 - 450 & 0 - 1700 RPM) for a range of drilling holes and driving screws on wood, metal and plastic. ⭐Upgraded 4-pole copper motor ensures 25% more stable and long-time operation, with 530 In-lbs torque which is much more powerful than other 2-pole motor
• ☘【1/2" Metal Chuck】All-metal gears and 1/2" key-less ratcheting chuck provide maximum durability and great accessory compatibility; F/R button and variable speed trigger are available for drilling and fastening
• ☘【Ergonomic Design】Rubber over-mold handle with ergonomic design offers maximum user comfort and less vibration; Trigger-activated LED light illuminates your work area
• ☘【What You Get】1 * TECCPO Cordless Drill/driver Set; 2 * 20-Volt Batteries; 1 * 2.0A Fast Charger; 1 * Contractor Bag; 1 * Belt Clip; 32 * Driver Bits; 1 * Extension Rod(60mm); 1 * User Manual; 1 * 2-Year Quality Promise

TECCPO

• Led foot light for superior visibility
• Variable speed trigger allows for control and precision on delicate work surfaces
• Dewalt built Brushless Motor for efficient performance and runtime
• 1/2 inch; Ratcheting chuck provides superior built gripping strength
• 340 UWO of power to help get the job done

DEWALT

• MULTIFUNCTIONAL BATTERY PACK: 20V 1.5Ah Lithium-ion battery pack with USB output compatible for phone charging and real-time capacity indicator
• 15+1 POSITION CLUTCH: 15+1 torque settings provide precise control for driving in/out screws to prevent stripping, and drilling into wood, ceramics, drywall, plastics and even metal with ease. Max torque for drilling into wood 13/16”(20mm) or steel plate 3/8” (10mm).
• ERGONOMIC DESIGN: Compact and lightweight design with superior motor minimizes fatigue in most daily screwing and drilling tasks; Rubber-covered handle provides a comfortable grip for being breezily operated in one hand.
• EFFICIENT WORKING: A flexible shaft could be used in some places where driver bits are hard to reach; LED light illuminates dark working areas; Variable speed（0-550RPM）with electric brake function provides precise operation.
• WHAT'S INCLUDED: 10pcs drill bits, 10pcs driver bits, an extension bar for sticking on fastener and a magnetic flexible shaft for hard-to-reach places, US based customer support

Avid Power